alsi10mg metallurgy

Comparison Study on Additive Manufacturing (AM) and

2018228 · The microstructural and mechanical properties of AlSi10Mg alloys fabricated by additive manufacturing (AM) and powder metallurgy (PM) routes were

contact

: B. Chen, B. Chen, S. K. Moon, X. Yao, G. Bi, J. Shen, J. Umeda, K. Kondoh

Formability and microstructure of laser powder bed fused

2023313 · AlSi10Mg alloy has been widely used in the LPBF process for its good castability, flowability and weldability [22]. Lin et al. [23] fabricated AlSi10Mg lobster-eye-shaped thin-wall components by LPBF process, and found that the laser parameters and structural features affected the formability of components. Qiu et al. [24] fabricated

contact

[PDF]

Material data Sheet: AlSi10Mg

2022125 · AlSi10Mg are ideal for applications which require a combination of good thermal properties and low weight. They can be machined, spark-eroded, welded, micro

contact

: 596KB

3DAlSi10Mg

20211219 · . : 、3DAlSi10Mg，3DAlSi10Mg

contact

Fatigue of AlSi10Mg specimens fabricated by additive

2017917 · The fatigue resistance of AM-SLM AlSi10Mg samples built in the Z direction after various heat treatments was investigated. Specimens were tested in the as

contact

: Naor Elad Uzan, Roni Shneck, Ori Yeheskel, Nachum Frage

：AlSi10Mg ...

202262 · ：， LPBF AlSi10Mg 。、、

contact

：AlSi10Mg ...

LPBF AlSi10Mg，、、、()、、，，。2LPBF AlSi10Mg，。3。，（4）、（5）、（6），LPBF AlSi10Mg。8。9。“Review on the Correlation Between Microstructure and Mechanical Performance for Laser Powder Bed Fusion AlSi10Mg”Additive Manufacturing。
- ：， LPBF AlSi10Mg （LPBF，， SLM） (AM) 。，， 3D 。，…
- ， LPBF，，，LPBF AlSi10Mg 10 ，，, , , , 。，（ 106 K/s ）、（ 106 K/m ）
  
  —（AlSi10Mg） -
  2022918 · 01. ，，、、、、、、、
  contact
  
  2：AlSi10Mg -
  20211230 · AlSi10Mg，，，、； 1、； 2、；
  contact
  
  ALSi10Mg？_
  201999 · AlSi10Mg 。，，，、，
  contact
  : 1
  
  Understanding the Laser Powder Bed Fusion of AlSi10Mg
  202076 · We examine the microstructural characteristics of LPBF AlSi10Mg produced by using a wide range of LPBF processing parameters with independently varied laser power, hatch spacing, scan speed, slice thickness, and the normalized energy density. The lower energy density produced lack of fusion flaws from residual interparticle spacing,
  contact
  
  MPB characteristics and Si morphologies on mechanical
  2021721 · The metallurgy and corresponding mechanical properties of as-built AlSi10Mg alloys are similar to those of commercial wrought and modified Al-Si alloys treated with T6-aging hardening process . Moreover, one of the characteristics of as-built SLM AlSi10Mg alloys is a supersaturated solid solution formed in fine microstructure of α-Al
  contact
  
  Thermal Properties of Selectively Laser-Melted AlSi10Mg
  20201019 · The thermal diffusivity and thermal conductivity of selectively laser-melted AlSi10Mg samples with different target relative densities, 99 and 99.5%, have been studied in the temperature range from 25 to 400 °C. The properties were measured in the build direction and orthogonal to the build direction, for the samples in the as-built and heat
  contact
  
  Effect of build atmosphere on the mechanical properties
  201811 · The tensile behavior of AlSi10Mg fabricated through selective laser melting (SLM) has been investigated in the present work. The technique involves layer by layer deposition of alloy powder and compacted by laser as per the inputs provided by CAD file. ... The metallurgy and processing science of metal additive manufacturing. Int. Mater. Rev ...
  contact
  
  2020412 · 3 SLM-AlSi10Mg [18] ：（a）（、）；（b）；（c） Figure 3. ...
  contact
  
  Mechanical properties and friction behaviors of
  201754 · The mechanical properties and friction behaviors of CNT/AlSi10Mg composites produced by spark plasma sintering (SPS) were investigated. The results showed that the densities of the sintered composites gradually increased with increasing sintering temperature and that the highest microhardness and compressive strength
  contact
  
  《Acta Materialia》，SLMAlSi10Mg ...
  2021420 · SLMAlSi10Mg（R），。 -，。
  contact
  
  AlSi10Mg3D--《 ...
  AlSi10Mg3D. 【】： ,3D, (SLM)3DAlSi10Mg,。. ,SLM ...
  contact
  
  2：AlSi10Mg -
  20211230 · AlSi10Mg，，，、； 1、； 2、； / 2：AlSi10Mg ，！AlSi10Mg ...
  contact
  
  High-cycle and very-high-cycle fatigue lifetime prediction
  202221 · In this study, the AlSi10Mg samples were fabricated in 0° and 90° building directions (BD), as shown in Fig. 1.The main chemical compositions of the alloy are listed in Table 1.The process parameters of SLM manufacturing are listed in Table 2.The mechanical properties of the AlSi10Mg samples (elastic modulus E, 0.2% offset yield strength σ 0.2,
  contact
  
  Understanding the Laser Powder Bed Fusion of AlSi10Mg
  202076 · We examine the microstructural characteristics of LPBF AlSi10Mg produced by using a wide range of LPBF processing parameters with independently varied laser power, hatch spacing, scan speed, slice thickness, and the normalized energy density. The lower energy density produced lack of fusion flaws from residual interparticle spacing,
  contact
  
  High-cycle and very-high-cycle fatigue lifetime prediction
  202221 · In this study, the AlSi10Mg samples were fabricated in 0° and 90° building directions (BD), as shown in Fig. 1.The main chemical compositions of the alloy are listed in Table 1.The process parameters of SLM manufacturing are listed in Table 2.The mechanical properties of the AlSi10Mg samples (elastic modulus E, 0.2% offset yield strength σ 0.2,
  contact
  
  Thermal Properties of Selectively Laser-Melted AlSi10Mg
  20201019 · The thermal diffusivity and thermal conductivity of selectively laser-melted AlSi10Mg samples with different target relative densities, 99 and 99.5%, have been studied in the temperature range from 25 to 400 °C. The properties were measured in the build direction and orthogonal to the build direction, for the samples in the as-built and heat
  contact
  
  On the thermal conductivity of AlSi10Mg and lattice
  202081 · AlSi10Mg is widely used in die-castings requiring high corrosion resistance, high strength at elevated temperature and resistance to hot cracking [3]. Its high Si content provides the high fluidity required to cast thin walls and complex geometries. ... Metallurgy of high-silicon steel parts produced using selective laser melting. Acta Mater ...
  contact
  
  Effect of build atmosphere on the mechanical properties
  201811 · The tensile behavior of AlSi10Mg fabricated through selective laser melting (SLM) has been investigated in the present work. The technique involves layer by layer deposition of alloy powder and compacted by laser as per the inputs provided by CAD file. ... The metallurgy and processing science of metal additive manufacturing. Int. Mater. Rev ...
  contact
  
  Mechanical properties and friction behaviors of
  201754 · The mechanical properties and friction behaviors of CNT/AlSi10Mg composites produced by spark plasma sintering (SPS) were investigated. The results showed that the densities of the sintered composites gradually increased with increasing sintering temperature and that the highest microhardness and compressive strength
  contact
  [PDF]
  
  EOS Aluminium AlSi10Mg Material Data Sheet
  2022110 · EOS Aluminium AlSi10Mg Good Strength & Dynamic Load Bearing Capacity EOS Aluminium AlSi10Mg is a widely used alloy that combines light weight and good mechanical properties. Different heat treatments can be applied to modify properties for example to increase ductility and conductivity. The material has good thermal and
  contact
  
  Effect of laser parameters on microstructure, metallurgical
  2018119 · AlSi10Mg alloy has been widely used in selective laser melting (SLM). However, the formation of metallurgical defects in this material during SLM process has not been studied sufficiently. In this work, different laser
  contact
  
  2：AlSi10Mg -
  20211230 · AlSi10Mg，，，、； 1、； 2、； 23:23
  contact
  
  ALSi10Mg？_
  201999 · AlSi10Mg 。，，，、，、、、、。 AlSi10Mg （%） Si Mg Mn Cu Fe Ni Zn Sn Al 9.2 0.48 0.21 0.26 0.84 0.17 0.25 0.11 σb/Mpa
  contact
  : 1
  
  AlSi10Mg
  2020713 · . 99.63%、AlSi10Mg，。. ，478 MPa，8%，122 HV。. ...
  contact
  [PDF]
  
  Material data Sheet: AlSi10Mg
  2022125 · AlSi10Mg are ideal for applications which require a combination of good thermal properties and low weight. They can be machined, spark-eroded, welded, micro shot-peened, polished and ... This produces a metallurgy and corresponding mechanical properties in the as-built condition which is similar to T6 heat-treated cast parts.
  contact
  
  Assessing the thermal stability of laser powder bed fused
  2023216 · Gas atomised AlSi10Mg powder (15–53 μm in diameter) was processed to fabricate bulk AlSi10Mg samples using an LPBF machine (SLM 250HL, SLM Solutions GmbH, Germany), which was operated under argon gas atmosphere to prevent oxidisation during the process. The substrate was made up of AlSi10Mg and pre-heated to 100°C
  contact
  [PDF]
  
  Al-Alloy AISi10Mg[1] - SLM Solutions
  2020106 · AlSi10Mg is a hardenable aluminum-based alloy with a density of circa 2.67 g/cm³ [2]. It is applicable for thin-walled components and parts with complex geometries. AlSi10Mg is highly suitable for processing and characterized by a good resistance in corrosive atmospheres as well as a high electrical conductivity.
  contact
  [PDF]
  
  AlSi10Mg Material data sheet 10-10 en - Prodways EN
  202281 · AlSi10Mg is a typical casting alloy with good casting properties and is typically used for cast parts with thin walls and complex geometry. It offers good strength, hardness and dynamic ... This produces a metallurgy and corresponding mechanical proper-ties in the as-built condition which is similar to T6 heat-treated cast parts. Therefore such
  contact
  
  (PDF) Thermodynamic Analysis of AlSi10Mg Alloy
  200611 · The chemical composition of the alloy before the addition of bismuth is shown in Table 1. In all melt preparation methods, the alloy was melted in an induction furnace (Induktio, Induktio d.o.o ...
  contact
  
  AlSi10Mg Aluminum Based Metal Powder for
  Aluminum-based metal powder is widely used in aerospace parts, automotive parts, profile surface spraying, and powder metallurgy. Applicable Equipment: AlSi10Mg metal p owder can be used in various
  contact
  
  AlSi10Mg_ ...
  201848 · AlSi10Mg，，，。，AlSi10Mg，70-80mm。 3 PREPAlSi10Mg
  contact
  
  AlSi10MgFe？_
  2008618 · AlSi10Mg 。AI-Si，。：YZAlSi10Mg，200℃、，、。
  contact
  : 4
  
  AlSi10MgFe？ -
  2008618 · AlSi10Mg 。. AI-Si，。. ：YZAlSi10Mg，200℃、，、。. ：TA0、TA1、TA2、TA3、TA9、TA10、TC4、GR1、GR2、BT1-00、BT1-0 ...
  contact
  Previous: en aw 6005a aluminium in de
  Next: ams 4145 liquid storage pot

Электронная почта: info@cjmetals.com.cn